THE ROME BUSINESS SCHOOL NIGERIA

Are you ready to take a seat on the management floors?

Strategy: Is this the right strategy to make your products known?

Rome Business School prides itself for its presence and relevance in over 140 countries; Nigeria inclusive. Majority of its courses; strategically designed with reference to globally accepted standards.

The idea of Rome Business School Nigeria is to tailor these global standards to a more unique grassroots-concentrated business environment (Nigeria).

 

“Follow my Strategic Marketing lessons”

Romano Pisciotti

nigeria@romebusinessschool.it

Romano Pisciotti

italmotor@gmail.com       (Romano Pisciotti)

http://romebusinessschool.it/en/rome-business-school-nigeria/

WE WILL ALL BE NIGERIANS

THE WORLD IN 2100 We will all be Nigerians
There is Africa in our past.

A hundred thousand years ago, humanity started from the highlands of the black continent to colonize the world… And there is Africa in our future.
Within this century, the bulk of the men and women who inhabit the planet will be native to Africa.

An extraterrestrial who, in 2100, did a hit-and-run visit to our planet and would describe us briefly would report that, for the most part, our grandchildren and great-grandchildren have black skin and frizzy hair. At least four out of ten people who would meet would be African. Much more than Chinese and Indian. And the Europeans? Well, the extraterrestrial should have luck to find them. Virtually invisible, a small minority: one in ten.
The population of the Earth is growing, in fact, a bit slower than in recent decades, but will continue to grow, especially in Africa.

Lagos, Kinshasa, Addis Ababa, Dar es Salaam These are the metropolises-boom of the next decades.
The countries destined to a faster population growth are: Nigeria, Congo, Ethiopia, Tanzania, Niger.

The Africa that it has today, scattered among savannahs, deserted forests, little more than a billion inhabitants, will have, predicts the United Nations, more than double (2.4 billion) in 2050 and four times as much (4.2 billion) at the end of the century. More than China and India combined.

 

…article selected by Romano Pisciotti

 

Anesthesia Workstation

A9800

 

Anesthesia Workstation

Your healthcare, we care.

In Nigeria by Romano Pisciotti

ITALMOTOR Ltd

A9800 Anesthesia Workstation

A9800 is an advanced yet easy to use anesthesia workstation that provides accurate, pneumatically driven and electronically controlled ventilation.

It has a user-friendly design, incorporates new technology and provides safe and effective treatment options for the clinician.
A9800 incudes Adult and Child modes that provide patient-appropriate defaults and ranges.

A9800 provides complete anesthesia ventilation capabilities that include traditional and “intensive-care type” ventilation modes like PCV-VG (volume guarantee). Low-flow anesthesia delivery creates savings by lowering facility gas usage. Sophisticated ventilation capabilities of A9800 will meet the needs of the full patient range. The integrated Electronic flowmeter provides accurate monitoring and intuitive operation.

Abundant options for A9800

Gas monitoring CO2, N2O & 5 types of anesthetic agents. AGSS (Anesthetic Gas Scavenging System) provides safe and effective waste gas removal.
Patient suction regulator.

Third vaporizer parking position.

A9800 Anesthesia Workstation

Advanced and clear user interface:

The large 15” TFT LCD with touch screen along with a navigator wheel provides a simple intuitive interface that enhances user control. The screen can be tilted upward and downward according
to the doctor’s needs and position. These ergonomic features assure the clinician can complete the entire operation easily and accurately. The parameter areas on the main screen are shown in different colors for ease of identification. The waveforms and alarm records are clearly shown for easy review by the clinician of the patient’s treatment information.

Powerful monitoring functions:

A9800 displays patient data with waveforms and spirometry loops. Loops can be stored as reference to best understand changes in patient response to therapy. Optional gas monitoring provides clinicians with complete information on patient ventilation and agent delivery and uptake.

The Electronic flow meters for O2, Air and N2O are designed especially for low-flow applications. This system includes electronic fresh gas flow displays along with traditional mechanical flow controllers and flow control knobs for enhanced patient safety
over fully electronic blending systems.
Data communications export is supported to connect to the
Hospital IT systems and support EMR.

A9800 Anesthesia Workstation

Full Featured Workstation:
Advanced features for therapy delivery are also easy to use. The single-turn APL valve on A9800 includes a quick-release function to quickly lower patient breathing pressure and accurately sets pressure limits
Automatic Compliance compensation along with Fresh Gas Flow compensation help clinician to deliver accurate and precise ventilation therapy
Full waveform display including integrated Spirometry provides loops when desired for improved clinical data analysis
System provides a minimum of 25% O2 concentration at all times utilizing a pneumatic Oxygen Ratio Controller. This enhances patient safety over systems that utilize electronic or software controlled ORC functions
Large stainless worktable provides extra convenience to the user, with the flip- up table design saving space efficiently
Impressive array of standard features improves the system usability: auxiliary oxygen flow meter with Air/O2 Blender and auxiliary AC power outlets
Air/O2 Blender for Aux Gas outlet is conveniently located on front panel to allow user to mix Aux Gas from 100% O2 to 21% O2 easily and accurately
Breathing system is heated to reduce condensation and is integrated within the workstation
Advanced breathing system is fully autoclaveable
Absorber by-pass function makes changing absorbent during a case easier Absorber is compatible with Standard Prepaks or loose-fill CO2 Absorbent Auto/Manual Switch is located on the breathing system for simple control of Ventilator On/Off
ACGO (Auxiliary Common Gas Outlet) switch is a standard feature to allow for use with non-rebreathing adapters
GCX-type rails support easy mounting of other devices to the workstation
6 Traditional Gas Supply Pressure Gauges allow for easy status monitoring of hospital wall gas supplies and gas cylinders/tanks
3 locking drawers for storage
Standard SelectatecTM-compatible mounts hold two vaporizers

A9800 Anesthesia Workstation Technical Parameters

Ventilation Modes

·Volume Control
·Pressure Control
·SIMV with Pressure Support (SIMV + PS) – with Volume or

Pressure-type mandatory breaths
·Pressure Support (with Apnea backup)
·PCV-VG (Pressure Control Ventilation with Volume Guarantee) ·Manual ventilation

Parameters and Ranges

·Pressure target: 5 – 70 cmH2O ·Pressure support (delta P): 3 – 50 cmH2O ·Tidal Volume: 20 – 1500 mL
·Breathing Freq.: 2-100 bpm

2-60 bpm in PS
2-100 bpm in SIMV-VC and SIMV-PC 4-100 bpm in other modes

·TINSP: 0.2-5.0 s
·PEEP: OFF, 3 – 30 cmH2O
·FreqMIN: 2 – 60 bpm
·T pause: OFF, 5%-60%
·Trigger: 1 – 15 L/min
·I:E Ratio: 4:1-1:8
·TSLOPE: 0 – 2 s
·Vaporizers: Sevoflurane, Desflurane, Isoflurane, Halothane,

Enflurane

Monitoring

·Continous monitoring of inspiratory O2 concentration, breathing frequency, airway pressure (Paw, Peak, Pmean, PEEP), minute volume and tidal volume.

·The measured parameters are displayed as large, easy to read digital values. Airway pressure, flow and CO2 (optional) are shown in graphical waveforms.

Alarms

·Apnea
·Apnea CO2
·Adjustable alarm limits for Inspiratory O2 concentration (FiO2) ·Adjustable alarm limits for Minute Volume (MV)
·Adjustable alarm limits for Airway pressure (PAW) ·Adjustable alarm limits for EtCO2 and agents
·Continuous Pressure
·O2 Supply Fail
·Negative Pressure
·High Breath Rate (PS)
·High PEEP
·Mixed Agents
·Low Battery
·AC Power Fail
·Technical alarms

Operation Conditions

·Operating voltage: AC100-240V, 50Hz/60Hz
·Temperature: 10 – 40°C(operation); -20 – 60°C (storage &transport) ·Relative humidity: ≤90%, non-condensing (operation);

≤90%, non-condensing(storage &transport) ·Weight (without vaporizer & cylinders): approx. 100Kg

·Dimensions (H x W x D): approx. 1400mm x 900mm x 760mm

Standards

EN 60601-1, EN 60601-1-2, ISO 80601-2-13

MediCare srl

In Nigeria by Romano Pisciotti

ITALMOTOR Ltd.

Motor Parts Industry – Nigeria

 

MPI (Motor Parts Industry) is official IVECO dealer in Nigeria and can supply any vehicle made by IVECOand ASTRA.

SPEARS

INFO italmotor@gmail.com Romano Pisciotti

MPI is the largest stockist of original IVECO spare parts in Nigeria and has a fully equipped workshop where all IVECO vehicles can be repaired.

 

 

 

DELFIN

DELFIN

 

DELFIN

B200M

Forklift Enabled Industrial Vacuum

The B200M has a great solids capacity, which simplifies the suction of a wide range of materials while salvaging possible liquids.
Thanks to the linchpin, the vacuuming separator can be flipped over 45°-90° to discharge the vacuumed material directly where necessary.
The vacuuming separator can be transported by a forklift truck.
The discharge of the vacuumed material is considerably simplified, which allows easier handling of the vacuum. That’s why we recommend the B200M for reduced spaces.

Main Features

  • Ideal for collection of large quantities of material
  • 3 Single-phase By-pass motors
  • Complete, quick and safe discharge
  • Portable with Forklift truck

 

 

italmotor@gmail.com

Knowledge of business

Six Business Requirements Startups Need To Consider in Nigeria.

 

A good knowledge of the business you are venturing into is needed before and during the business. This is a key prerequisite to any business undertaking. Most people venture into businesses they know little about and are in a hurry to succeed that they fail to make the necessary market/business research. Entrepreneurs must invest in knowledge so as not to fall prey to loopholes that could be avoided with good information.

http://italmotor.africa/2018/08/13/startups-in-nigeria/

Romano Pisciotti: recommended

Arise, O Compatriots

English lyrics

Arise, O compatriots
Nigeria’s call obey
to serve our fatherland
with love and strength and faith.
The labour of our heroes past
shall never be in vain,
to serve with heart and might
one nation bound in freedom
Peace and unity.
Oh God of creation,
direct our noble cause
Guide thou our leaders right
Help our youth the truth to know
In love and honesty to grow
And living just and true
Great lofty heights attain
To build a nation where peace
And justice shall reign

Lyrics in Hausa

Yaku ‘yan Nijeriya ku farka;
Ku amsa kiran Nijeriya;
Domin mu taimaki ƙkasarmu ta haihuwa;
Don aiki ga ƙkasata cikin soyayya da riƙkon gaskiya;
Domin gudumawar da shuwagabaninmu ‘yan kishin ƙkasa suka bada;
kada ta zama a banza;
Muyi aiki da zuciya ɗaya da girmamawa a gareta;
Domin ta kasance ƙkasa ɗaya mai yanci ga kowa tare da haɗin kai da zaman lafiya.

Lyrics in Igbo

Bilie nu ndi ala anyi
Irubere oku Nigeria isi
Ije ozi ala nna anyi
Na ifunanya na ike na okwukwe,
Olu ndi dike anyi gara aga
Agaghiabu ihe efu,
Ije ozi n’ obi n’ ike n’okwukwe
Otu ala jikolu onu na nnwere onwe
Udo na ịdị n’otu.

Lyrics in Yoruba

Dide eyin ara .
Wa je-pe Naijiria,
ka fife sin ‘lewa
pelu okun ati ‘gbagbo
Ki ise awon akoni wa
ko ma se ja sa-san,
Ka sin tokan-tara
ile tominira wa,
ti alafia so-dokan.

National Pledge

The Nigerian pledge of allegiance is recited immediately after the playing of the Nigerian national anthem: It was written by Professor (Mrs.) Felicia Adebola Adedoyin in 1976.

I pledge to Nigeria my country.
To be faithful, loyal and honest.
To serve Nigeria with all my strength.
To defend her unity, and uphold her honour and glory.
So help me God.

Romano Pisciotti: LIKE

Nigeria Air

Officially named Nigeria Air, the airline’s logo and livery were unveiled at the Farnborough Air Show in London to mixed reactions at home.

Nigeria Air 1

The federal government will own just 5% of the airline in a public-private partnership proposal designed to allow for professional management and avoid previous mistakes.

The Nigerian government estimates that initial capital for the airline will range between $150m (£115m) and $300m in the first few years of operation though the private sector partner has not been identified yet.

“This will be a national carrier that is private sector led and driven. It is a business, not a social service,” Nigerian Minister of State for Aviation Hadi Sirika said.

“Government will not be involved in running it or deciding who runs it. The investors will have full responsibility for this.”

The original Nigerian Airways collapsed 15 years ago and a 2004 joint venture with billionaire Richard Branson named Virgin Nigeria shut down shortly after he pulled out five years later because of mismanagement.

Nigeria Air 2

Nigeria Air will take off with 15 leased aircraft in December but there are plans to own 30 planes within three to four years flying to 81 domestic, regional and international destinations.

DUNLOP ARGENTINA

DULOP ARGENTINA S.A.

We work at the forefront of innovation and technology of industrial rubber products, to accompany your projects from conception to completion.

www.dunlop.com.ar/eng/

italmotor@gmail.com

Dunlop Argentina S.A. has been developing oil perforation and explorations hoses for more than 40 years, in accordance with technological advances and using the best materials in the market, fulfilling the specifications of the American Petroleum Institute (API) and the ISO Quality System 9001. Such certifications allow the use of the API monogram on hoses according to the corresponding specification API Spec. (7K-16C).
The main applications of rotary hoses are:
Injection of mud from the feeding tubeto the swivel
hook.
– Injection of mud from the tank, through the bomb to the
pipe and its return.
– Cushioning vibration between rigid connections of the
installation.
Water injection in coke towers within refineries. – Cementation, acidification and well profiling.
General Choke and Kill service.
These hoses are provided with threaded couplings, LINE PIPE kind, according to API Spec 5B or welded couplings or flanges according to APISpec6A.

Terminals can be Built-in or Swaged- on process to the hose.
These general conditions added to the specific conditions of each type and grade of application make us proud of our Rotary hoses, and grant us a vast and prominent positioning at a local as well as at an international level.

Rotary Hose

Dunlop Industrial Hoses is one of our main product lines. We offer to the market a complete range of products as a result of our experience and modern technology: synonym of quality, safety and reliability, ensuring suitability for each specific purpose.

CEMENT HOSES
MUD SUCTION HOSES

Transport

ON-SHORE LOAD AND DISCHARGE HOSES
– S15
LPG (LIQUEFIED PETROLEUM GAS) HOSES
100% AROMATIC
TANKER DISCHARGE HOSES

MINING AND DREDGING

 AIR HOSES

FIRE RESISTANT HOSES WITH ARAMIDE REINFORCEMENT

 

DREDGING 

FLEXIBLE HOSES (SUCTION/DISCHARGE)
Industrial hose
FLEXIBLE HOSES FOR CUTTER/LADDER JOINT IN SUCTION DREDGERS
PIPING JOINTS

Conveyor belts 

Conveyor belts is one of our traditional line of products. It is a very important business unit for us. Years of experience and permanence in the market, make up for a history of continuous development and service for:
· Industry.
· Agriculture.
· Mining.
· Special applications.

 

certificados-2018

Dunlop Argentina’s Quality Management System has been certified API Q1 9th Edition by the American Petroleum Institute (API). Focusing on the oil exploration and production market, this certification will allow us to guarantee that our design, production and selling of High Pressure Mud and Cement Hoses (HPMACH) will satisfy our customers consistently.

API Q1 9th Edition as compared to ISO 9001, addresses over 70 additional requirements and emphasizes a Management System based also on risks not only on processes. Among the most significant requirements are Risks Assessment and Management related to Product Quality and Delivery, Contingency Plan, Quality Plan and Management of Change.

Additionally, during API Q1 Certification Audit, Dunlop Argentina Quality Management System has also been certified under ISO 9001:2008 Standard.

 

A brief history:

1910. START OF THE COMMERCIAL ACTIVITY IN ARGENTINA, AS PART OF PIRELLI GROUP, SELLING IMPORTED PRODUCTS.
1917. START OF THE INDUSTRIAL ACTIVITY IN ARGENTINA.
1932.CREATION OF FAIC (ARGENTINE FEDERATION OF THE RUBBER INDUSTRY). WE ARE PRESENTLY THE OLDEST MEMBER.
1955.ACQUISITION AND ENLARGEMENT OF THE INDUSTRIAL PLANT IN BELLA VISTA.
1984.CHANGE OF NAME TO PIRELLI TÉCNICA SAIC.
1994. THE COMPANY BECOMES DUNLOP ARGENTINA S.A.

http://www.rexfrog.com/rexfrogs-friends/dunlop-argentina/